Show simple item record

dc.contributor.author Batane, N.R.
dc.contributor.author Morrison, D.J.
dc.contributor.author Moosbrugger, J.C.
dc.date.accessioned 2011-06-09T11:51:44Z
dc.date.available 2011-06-09T11:51:44Z
dc.date.issued 2010
dc.identifier.citation Batane, N.R. et al (2010) Cyclic plasticity of polycrystalline nickel under axial-torsional loading, Materials Science & Engineering: A, Vol. 528, Issue 1, pp. 467-473 en_US
dc.identifier.issn 0921 5093
dc.identifier.uri http://hdl.handle.net/10311/847
dc.description some symbols may not appear as in the original abstract. en_US
dc.description.abstract The axial–torsional cyclic deformation behavior of polycrystalline nickel was investigated by performing fully reversed plastic strain amplitude controlled fatigue experiments at effective plastic strain amplitudes ranging from 1×10−4 to 1×10−3. Experiments were accomplished under proportional and 90◦ out-of-phase nonproportional loading paths. Results indicate that loading path has very little effect on the cyclic response at the lower effective plastic strain amplitude. However, at the higher effective plastic strain amplitude, significant additional hardening is induced by the nonproportional loading path. en_US
dc.language.iso en en_US
dc.publisher Elsevier, www.elsevier.com en_US
dc.subject Fatique en_US
dc.subject Cyclic plasticity en_US
dc.subject Nickel en_US
dc.subject Biaxial loading en_US
dc.title Cyclic plasticity of polycrystalline nickel under axial–torsional loading en_US
dc.type Published Article en_US
dc.link http://www.elsevier.com/locate/msea en_US


Files in this item

This item appears in the following Collection(s)

Show simple item record

Search UBRISA


Advanced Search

Browse

My Account