Browsing Research articles (Dept of Physics) by Title
Previous Page
Now showing items 38-46 of 46
-
Jain, P.K.; Lungu, E.M.; Mogotsi, B. (Elsevier Science Ltd. http://www.sciencedirect.com/science/journal/09601481, January NaN, 2002)[more][less]
Abstract: Lack of trained manpower for repair and maintenance of solar energy devices in Botswana has resulted in failure of devices, loss of revenue, and dwindling of consumer faith in solar technologies. The government of Botswana commissioned a study to assess the needs for trained manpower in New and Renewable Sources of Energy (NRSE) technologies, to identify the required training programs and their levels, and the facilities that need to be upgraded and/or created for the implementation of such training programs at the existing technical and educational institutions within the country. The paper presents the findings of the study, and the recommendations made. The study proposed seven training programs at progressively increasing skills and expertise levels that include two certificate courses in each of the solar water heating and photovoltaic technologies for maintenance personnel, a national craft certificate program in solar energy technologies, a higher diploma in energy technologies for supervisory personnel, and a short course for upper management personnel in decision-making positions in order to raise their skills in the procurement of equipment and services, and to provide overall effective leadership. A short course to upgrade the skills of the present maintenance personnel to alleviate the immediate problems is also proposed. Required upgrading of existing technical training facilities, the creation of new facilities and estimated budgetary requirements constitute some of the recommendations. The recommendations have gone through various channels of discussions, and have been accepted in principle. The report is currently under consideration for implementation by relevant government departments. URI: http://hdl.handle.net/10311/137 Files in this item: 2
license.txt (1.998Kb) -
Masale, M. (Elsevier Science Ltd. http://www.elsevier.com/locate/physb, NaN, 2004)[more][less]
Abstract: The energy spectrum of an electron confined near a current-carrying core is obtained as a function of the azimuthal applied magnetic field within the effective-mass approximation. The double degeneracy of the non-zero electron's axial wave number (kz) states is lifted by the current-induced magnetic field while that of the non-zero azimuthal quantum number (m) states is preserved. A further analysis is the evaluations of the oscillator strengths for optical transitions involving the lowest-order pair of the electron's energy subbands within the dipole approximation. The radiation field is taken as that of elliptically polarized light incident along the core axis. In this polarization and within the dipole approximation, the allowed transitions are only those governed by the following specific selection rules. The azimuthal quantum numbers of the initial and final states must differ by unity while the electron's axial wave number is conserved. The azimuthal magnetic field is also found to lift the multiple degeneracies of the kz=0 interaction integrals as well as those of the oscillator strengths for optical transitions. URI: http://hdl.handle.net/10311/244 Files in this item: 2
license.txt (1.998Kb)Masale_PB_2004.pdf (1.197Mb) -
Wright, C.; Kgaswane, E.M.; Kwadiba, M.T.O.; Simon, R.E.; Nguuri, T.K.; McRae-Samuel, R. (Elsevier Science Ltd. www.elsevier.com/locate/lithos, NaN, 2003)[more][less]
Abstract: Events induced by deep gold-mining activity on the edge of the Witwatersrand basin dominate the seismicity of South Africa. The deployment of 54 broad-band seismic stations at 84 separate locations across southern Africa between April 1997 and April 1999 (Kaapvaal network) enabled the seismicity of South Africa to be better defined over a 2-year period. Seismic events located by the South African national network, and by localized seismic networks deployed in mines or across goldmining areas, were used to evaluate earthquake location procedures and to show that the Kaapvaal network locates mininginduced tremors with an average error of 1.56 ± 0.10 km compared with 9.50 ± 0.36 km for the South African network. Travel times of seismic events from the mines recorded at the Kaapvaal network indicate regional variations in the thickness of the crust but no clearly resolved variations in seismic wavespeeds in the uppermost mantle. Greater average crustal thicknesses (48–50 km compared with 41–43 km) are observed in the northern parts of the Kaapvaal craton that were affected by the Bushveld magmatism at 2.05 Ga. Estimates of average crustal thickness for the southern part of the Kaapvaal craton from receiver functions (38 km) agree well with those from refracted arrivals from mining-induced earthquakes if the crustal thicknesses below the sources are assumed to be 40–43 km. In contrast, the average crustal thickness inferred from refracted arrivals for the northern part of the Kaapvaal craton is larger by about 7 km (51 km) than that inferred from receiver functions (44 km), suggesting a thick mafic lower crust of variable seismic properties due to variations in composition and metamorphic grade. Pn wavespeeds are high (8.3–8.4 km/s), indicating the presence of highly depleted magnesium-rich peridotite throughout the uppermost mantle of the craton. Seismic Pg and Sg phases indicate that the upper crust around the Witwatersrand basin is comparatively uniform in composition when averaged over several kilometres. URI: http://hdl.handle.net/10311/280 Files in this item: 1
Wright_L71_2003.pdf (3.483Mb) -
Jain, P.K.; Lungu, E.M. (Elsevier Science Ltd: http://www.elsevier.com/wps/find/journaldescription.cws_home/969/description#description, NaN, 2002)[more][less]
Abstract: Abstract Harmonic analysis of sunshine duration and solar irradiation measured at Sebele, Botswana is carried out. The data used consists of the monthly averages and the Julian-days averages of sunshine duration and solar irradiation sequences. This study involves splitting the time series into deterministic and stochastic components, and determining the proportion of the variance explained by each component. The stochastic component is analyzed for persistence using the Box and Jenkins technique. It is found that the stochastic component for monthly averages solar radiation series is best described by the second-order autoregressive Markov process, while that for Julian-days averages series has no memory. URI: http://hdl.handle.net/10311/138 Files in this item: 2
license.txt (1.998Kb) -
Masale, M. (Elsevier Science Ltd. www.elsevier.com/locate/physb, February NaN, 2002)[more][less]
Abstract: The experimental techniques of attenuated total reflection and grating-coupling were originally employed separately as probes for surface polaritons. However, as far back as the mid-1970s, some value was found in actually combining them into a single tool for probing elementary surface excitations. In this article, the theory of the two methods combined into one probe for surface polaritons is presented. The main results of the calculations, here, are the firstorder diffuse reflectivities, which arise due to the presence of a classical grating. For the ease of presentation, only a semi-infinite specimen is considered and the grating is thought to be deposited only on one interface. The discussion highlights the advantages the combined technique has over either of the two methods when each is employed on its own. URI: http://hdl.handle.net/10311/195 Files in this item: 2
license.txt (1.998Kb) -
Masale, M. (Elsevier Science Ltd. http://www.elsevier.com/wps/find/journaldescription.cws_home/505712/description#description, NaN, 2003)[more][less]
Abstract: The experimental techniques of attenuated total reflection (ATR) and grating coupling were originally employed separately as probes for polaritons. The combined technique of these methods into a single probe is a very versatile tool for probing elementary surface excitations. A theoretical investigation of this single probe for surface polaritons, ATRgrating coupling, is undertaken. The emphasis is on the calculations of first-order diffuse reflectivities, which arise due to the presence of a classical grating. More specifically, the ATR set-up in the Otto configuration is considered and for ease of presentation of the results, a classical grating is thought to be deposited on only one interface of a surface-active thin-film specimen. The discussion highlights the advantages the combined technique has over either of the two methods when each is employed on its own. URI: http://hdl.handle.net/10311/233 Files in this item: 2
license.txt (1.998Kb) -
Thermal annealing dependence of some physical propertiesof Bi-substituted Sn–Sb–Se glassy thin filmsAhmad, M.; Thangaraj, R.; Sathiaraj, T.S. (EDP Sciences, NaN, 2009)[more][less]
Abstract: Bulk glasses of the Sn10Sb20−xBixSe70 (0 x 8) system were prepared by the conventional melt quenching technique. Thin films were prepared by the thermal evaporation technique on glass substrates. Appearance of some crystalline phases is observed from the X-ray diffractograms after heat treatment below the glass transition temperature for 1 h. Scanning electron microscopy studies also show the presence of microcrystalline phases in the amorphous matrix after annealing for 1 h. The effect of Bi concentration and heat treatment on the optical gap and activation energy for dark conductivity were also investigated for the pristine as well as annealed films. The results are discussed on the basis of models related to the presence of defect states in chalcogenide materials. URI: http://hdl.handle.net/10311/534 Files in this item: 1
Thermal annealing dependence.pdf (822.7Kb) -
Masale, M. (Elsevier Science Ltd. www.elsevier.com/locate/physc, January NaN, 2003)[more][less]
Abstract: The problem of a type II superconducting disk in a spatially inhomogeneous magnetic field is considered. The aim of the investigations undertaken here is to evaluate the effects of the spatial inhomogeneity of the parallel component of the applied magnetic field on the nature of the superconducting nucleation of a short cylinder. Full numerical solutions of the linearized Ginzburg-Landau equation for the order parameter, taking into account only the parallel component of the field, are presented in the case of a solid disk;free-standing and in a metallic matrix. In the case of a mesoscopic system, only the limiting form of the critical temperature is obtained. The temperature-field (e-f) curves are characterized by flux-entry points at each of which the azimuthal quantum number decreases by unity. The quasi-period of the flux-entry points increases in f with the increasing strength of the spatial inhomogeneity of the applied field. The increased effect of coating the superconductor with a suitable normal metal leads to the well known suppression of the critical temperature as well as smoothing out of flux entries. It is predicted that the wiping out of surface nucleation is effected with relative ease when the applied magnetic field is uniform than when it posseses a degree of spatial inhomogeneity. URI: http://hdl.handle.net/10311/197 Files in this item: 2
license.txt (1.998Kb) -
Otiti, T.; Ekosse, G-I.; Stephen, S.T. (Bioline International. http://www.ajol.info/journal_index.php?jid=90, June NaN, 2007)[more][less]
Abstract: Normal, helical and zigzag deposited Ni films were produced by letting a vapour stream of source material impinge on Corning 1737 glass substrates at oblique incidence while rotating the substrate during deposition. Films produced by glancing angle deposition (GLAD) technique while rotating the substrate. The microstructures of these Ni films were studied using X-ray diffractometry technique. The X-ray diffraction (XRD) patterns depicted 100% and 42% relative intensity (RI) peaks identified for normal and helical deposited Ni films but none for the zigzag deposited Ni film. Higher degree of crystallinity of Ni was demonstrated by the helical thin film sample having 200 nm thickness (sample Ni40) compared to the normal thin film which had only the 100% RI peak defined. Should an application therefore require Ni thin films of high crystallinity, it would be the film prepared with helical microstructure of 200 nm thickness that will be employed. URI: http://hdl.handle.net/10311/353 Files in this item: 2
license.txt (1.998Kb)Otiti_JASEM11_2007.pdf (451.5Kb)
Previous Page
Now showing items 38-46 of 46