Browsing Physics by Issue Date
Now showing items 1-20 of 46
Next Page-
King, J.G.; Williams, W. (American Geophysical Union. http://www.agu.org/journals/jd/, NaN, NaN)[more][less]
Abstract: Although several studies have recommended removal of secondary components of magnetic remanence by zero-field cycling from room temperature to a temperature much lower than the low temperature transition for magnetite (about 120 K), the method has not become a standard routine technique. This is partly due to the poor understanding of the behavior of magnetite particles at the low-temperature transition zone. Previous experiments by other researchers have used magnetite powders. In such powders it is always possible to attribute any discrepancy between the results observed and theory to possible existence of magnetostatic interaction effects or existence of elongated particles in samples presumed to contain only equant particles. Such factors need to be eliminated in order to have a better understanding of the low temperature behavior of magnetite particles. Low-temperature magnetic properties of lithographically produced arrays of both interacting and noninteracting cubic magnetite particles as well as those from powder particles have been measured as part of this study. A gradual increase in the amount of saturation isothermal remanent magnetization (SIRM) lost at the Verwey transition Tv with increasing particle size in the pseudo-single-domain size range has been observed. This behavior is consistent with the vortex state domain structure. The grain size dependence of the amount of SIRM lost at Tv is most probably what previous researchers reported as a magnetic memory particle-size-dependent trend. Magnetic memory measured during the cooling and warming process is shown to be a stress-related phenomenon. Such measurements could be useful in assessing the nature of stress in a magnetite sample. URI: http://hdl.handle.net/10311/347 Files in this item: 1
King_JGR_2000.pdf (2.594Mb) -
King, J G; Ranganai, RT (BOSHASTED, NaN, 2000)[more][less]
Abstract: Emissions of vehicles represent a significant contribution to environmental pollution along roads. Pollutants from cars include gases such as (NOx, CO, CO2), solid components such as sort particles from exhaust system, abrasion products from the brakes and engine etc (Leven et al., 1999). Aerosols pollutants can reduce significantly the quality of the environment and seriously affect human health e.g. by contributing to high rates of allergies or diseases of the respiratory system. In this study, samples were collected at various distances from a busy road, Gaborone-Tlokweng road near Game store. Non-magnetic adhesive paper pieces were used as sample collectors. Magnetic properties of the aerosols collected were measured using a highly sensitive magnetometer (AGM-Micromag). Magnetic properties measured include total magnetic moment, hysteresis loops and associated parameters such as coercivity. In general, observed hysteresis loops are typical for magnetite. URI: http://hdl.handle.net/10311/406 Files in this item: 1
King_BOSHASTED_2000.pdf (159.1Kb) -
King, J.G.; Ranganai, R.T. (Botswana Geoscientists Association, NaN, 2001)[more][less]
Abstract: The Hopkinson effect is the increase of magnetic susceptibility with temperature from near room temperature to near the Curie point. Although this effect has been known for more than a century, it has not been effectively utilised as an analysing tool in palaeo, rock and environmental magnetic studies. This is partly due to the poor understanding of the influence of magnetite (Fe,O.)grain parameters on the Hopkinson effect. In an attempt to study the effects of grain size on the Hopkinson effect, magnetite samples with well-defined grain sizes have been used. it was found that in general, magnetic susceptibility enhancement factor (SEF) obtained by heating the sample in a non-oxidising environment, increase with decreasing grain size. The relation of SEF to grain size is linear when plotted on a log-log scale. This relation has been used to infer grain sizes (hence magnetic domains) for some selected Botswana rocks. The inferred magnetic domains are consistent with independent predictions from hysteresis measurements for the same samples. URI: http://hdl.handle.net/10311/338 Files in this item: 1
King_BJES_2001.pdf (625.5Kb) -
Ranganai, R.T.; Kampunzu, A.B.; Atekwana, E.A.; Paya, B.K.; King, J.G.; Koosimile, D.I.; Stettler, E.H. (Royal Astronomical Society. http://www.wiley.com/bw/journal.asp?ref=0956-540X&site=1, NaN, 2002)[more][less]
Abstract: The Limpopo Belt of southern Africa is a Neoarchean orogenic belt located between two older Archean provinces, the Zimbabwe craton to the north and the Kaapvaal craton to the south. Previous studies considered the Limpopo Belt to be a linearly trending east-northeast belt with a width of ~250 km and ~600 km long. We provide evidence from gravity data constrained by seismic and geochronologic data suggesting that the Limpopo Belt is much larger than previously assumed and includes the Shashe Belt in Botswana, thus defining a southward convex orogenic arc sandwiched between the two cratons. The 2 Ga Magondi orogenic belt truncates the Limpopo–Shahse Belt to the west. The northern marginal, central and southern marginal tectonic zones define a single gravity anomaly on upward continued maps, indicating that they had the same exhumation history. This interpretation requires a tectonic model involving convergence between the Kaapvaal and Zimbabwe cratons during a Neoarchean orogeny that preserved the thick cratonic keel that has been imaged in tomographic models. URI: http://hdl.handle.net/10311/326 Files in this item: 1
Ranganai_GJI_2002.pdf (1.361Mb) -
Ringrose, S.; Kampunzu, A.B.; Vink, B.W.; Matheson, W.; Downey, W.S. (John Wiley & Sons, Ltd. http://www3.interscience.wiley.com/journal/117935722/grouphome/home.html, NaN, 2002)[more][less]
Abstract: Quaternary sedimentation in the Moshaweng dry valley of southeastern Botswana is evaluated on the basis of geomorphological evolution and sedimentological analyses. Stratigraphic evidence reveals an 'upper surface (1095 m) containing abundant sil-calcrete, an intermediate surface (1085 m) in which sil-calcrete underlies nodular calcrete and lower (1075 m) surface in which sil-calcrete and nodular calcrete are interbedded. This subdivision is reflected in the geochemical composition of the sediments which show an overall trend of decreasing Si02 content (and increasing CaC03 content) with depth from the highest to the lowest surface levels. The calcretes and sil-calcretes represent modifications of pre-existing detrital Kalahari Group sand and basal Kalahari pebbles which thinned over a Karoo bedrock high. Modification took place during wet periods when abundant Ca++ -rich groundwater flowed along the structurally aligned valley system. With the onset of drier conditions, water table fluctuations led to the precipitation of nodular calcretes in the phreatic layer to a depth of about 20 m. A major geochemical change resulted in the preferential silicification of the nodular calcrete deposits. Conditions for silica mobilization may be related to drying-induced salinity and in situ geochemical differentiation brought about by pebble dissociation towards the top of the sediment pile. As calcretization and valley formation progressed to lower levels, silica release took place on a diminishing scale. Thermoluminescence dating infers a mid-Pleistocene age for sil-calcrete formation suggesting that valley evolution and original calcrete precipitation are much older. Late st~ge dissolution of CaC03 from pre-existing surface calcretes or sil-calcretes led to the formation of pedogenic case-hardened deposits during a time of reduced flow through the Moshaweng system possibly during the upper or late Pleistocene. URI: http://hdl.handle.net/10311/310 Files in this item: 1
Ringrose_ESPL_2002.pdf (3.095Mb) -
Jain, P.K.; Lungu, E.M. (Elsevier Science Ltd: http://www.elsevier.com/wps/find/journaldescription.cws_home/969/description#description, NaN, 2002)[more][less]
Abstract: Abstract Harmonic analysis of sunshine duration and solar irradiation measured at Sebele, Botswana is carried out. The data used consists of the monthly averages and the Julian-days averages of sunshine duration and solar irradiation sequences. This study involves splitting the time series into deterministic and stochastic components, and determining the proportion of the variance explained by each component. The stochastic component is analyzed for persistence using the Box and Jenkins technique. It is found that the stochastic component for monthly averages solar radiation series is best described by the second-order autoregressive Markov process, while that for Julian-days averages series has no memory. URI: http://hdl.handle.net/10311/138 Files in this item: 2
license.txt (1.998Kb) -
Jain, P.K.; Lungu, E.M.; Mogotsi, B. (Elsevier Science Ltd. http://www.sciencedirect.com/science/journal/09601481, January NaN, 2002)[more][less]
Abstract: Lack of trained manpower for repair and maintenance of solar energy devices in Botswana has resulted in failure of devices, loss of revenue, and dwindling of consumer faith in solar technologies. The government of Botswana commissioned a study to assess the needs for trained manpower in New and Renewable Sources of Energy (NRSE) technologies, to identify the required training programs and their levels, and the facilities that need to be upgraded and/or created for the implementation of such training programs at the existing technical and educational institutions within the country. The paper presents the findings of the study, and the recommendations made. The study proposed seven training programs at progressively increasing skills and expertise levels that include two certificate courses in each of the solar water heating and photovoltaic technologies for maintenance personnel, a national craft certificate program in solar energy technologies, a higher diploma in energy technologies for supervisory personnel, and a short course for upper management personnel in decision-making positions in order to raise their skills in the procurement of equipment and services, and to provide overall effective leadership. A short course to upgrade the skills of the present maintenance personnel to alleviate the immediate problems is also proposed. Required upgrading of existing technical training facilities, the creation of new facilities and estimated budgetary requirements constitute some of the recommendations. The recommendations have gone through various channels of discussions, and have been accepted in principle. The report is currently under consideration for implementation by relevant government departments. URI: http://hdl.handle.net/10311/137 Files in this item: 2
license.txt (1.998Kb) -
Nijegorodov, N.; Mabbs, R. (Elsevier Science BV; www.elsevier.com/locate/saa, January 15, 2002)[more][less]
Abstract: [Please note that the mathematical symbols have not transposed into this abstact].The luminescent and laser properties of heteroaromatic and aromatic compounds are reviewed and discussed on the basis of all possible mutual arrangements of singlet and triplet states. All heteroaromatic compounds are divided into five classes. It is shown that a heteroaromatic compound can only be an effective laser dye if it belongs to class V (a situation where the Tn_* level lies at higher energy than the S__* 1 level). Moreover, it is shown that the energy interval between the Tn_* and S__* 1 states must be no less than 1000 cmâ 1 since the rate constant of the non-radiative process S__*1 _Tn_*_T__1 is usually 100 times greater than the fluorescence rate constant. The classification is extended to compounds with orbitals of _l,_*, _,__* and _l,__* nature. Pure aromatic compounds, the spectral-luminescent properties of which are solely determined by transitions of _-electrons (_ _ _*), are also divided into five classes, depending on the mutual arrangement of the Sp(1La), S_(1Lb), Tp(3La) and T_(3Bb) states. It is found that only aromatic compounds of classes IV and V can be effective scintillators and laser dyes. It is also shown that the energy interval S_â Sp (for class IV) and T_â Sp (for class V) must be no less than 1000 cmâ 1. To illustrate the classifications for heteroaromatic and aromatic compounds, 12 specifically chosen compounds were studied experimentally and quantum chemically. The quantum yields, _ and decay times, _f of fluorescence in aerated and non-deaerated ethanol or cyclohexane solutions were measured. The oscillator strength, fe, fluorescence rate constant, kf, natural lifetimes, _0 T and intersystem crossing rate constants, kST are calculated. The laser ability of each of the compounds studied is tested. The suggested classification schemes can be extremely useful in the quest for effective scintillators and laser dyes among hypothetical heteroaromatic and aromatic molecules, enabling evaluation of these properties for a particular compound using only quantum chemical simulations. URI: http://hdl.handle.net/10311/136 Files in this item: 2
license.txt (1.998Kb)nijegorodov_sa_2002.pdf (1.811Mb) -
Masale, M. (Elsevier Science Ltd. www.elsevier.com/locate/physb, February NaN, 2002)[more][less]
Abstract: The experimental techniques of attenuated total reflection and grating-coupling were originally employed separately as probes for surface polaritons. However, as far back as the mid-1970s, some value was found in actually combining them into a single tool for probing elementary surface excitations. In this article, the theory of the two methods combined into one probe for surface polaritons is presented. The main results of the calculations, here, are the firstorder diffuse reflectivities, which arise due to the presence of a classical grating. For the ease of presentation, only a semi-infinite specimen is considered and the grating is thought to be deposited only on one interface. The discussion highlights the advantages the combined technique has over either of the two methods when each is employed on its own. URI: http://hdl.handle.net/10311/195 Files in this item: 2
license.txt (1.998Kb) -
Masale, M. (Elsevier Science Ltd. www.elsevier.com/locate/physc, August 15, 2002)[more][less]
Abstract: The azimuthal surface nucleation field of an infinitely long type II superconducting cylindrical filament is calculated from the linearized Ginzburg-Landau equation for the order parameter. A current is thought to be passed along the axis of the filament which induces a magnetic field in the azimuthal direction. On increasing the current, the field increases to a value whereby a phase transition from the superconducting to the normal state occurs. The magnetic field lines are parallel to the surface of the cylindrical filament so that the required critical field is Hc3; the parallel surface nucleation field of a type II superconductor. The systems considered are a solid cylinder; free-standing and in a metallic matrix; and a very thin-walled hollow cylinder. The full numerical analysis is carried out only for a solid cylinder. In the case of a thin-walled cylindrical shell, the quantitative description of the superconducting- normal phase is given in terms of the limiting form of the temperature for small fields. URI: http://hdl.handle.net/10311/196 Files in this item: 2
license.txt (1.998Kb) -
Masale, M. (Elsevier Science Ltd. http://www.elsevier.com/wps/find/journaldescription.cws_home/505712/description#description, NaN, 2003)[more][less]
Abstract: The experimental techniques of attenuated total reflection (ATR) and grating coupling were originally employed separately as probes for polaritons. The combined technique of these methods into a single probe is a very versatile tool for probing elementary surface excitations. A theoretical investigation of this single probe for surface polaritons, ATRgrating coupling, is undertaken. The emphasis is on the calculations of first-order diffuse reflectivities, which arise due to the presence of a classical grating. More specifically, the ATR set-up in the Otto configuration is considered and for ease of presentation of the results, a classical grating is thought to be deposited on only one interface of a surface-active thin-film specimen. The discussion highlights the advantages the combined technique has over either of the two methods when each is employed on its own. URI: http://hdl.handle.net/10311/233 Files in this item: 2
license.txt (1.998Kb) -
Jain, P.K.; Lungu, E.M.; Prakash, J. (Elsevier Science Ltd. www.elsevier.com/locate/renene, NaN, 2003)[more][less]
Abstract: The Republic of Botswana is one of the sunniest countries in Southern Africa. It has very little cloud cover, insufficient rainfall, very low humidity, and very low wind speed throughout the year for most parts of the country. The daily extremum temperatures appear to be very much related to solar irradiation which in turn depends on sunshine duration. In Botswana, solar irradiation on a horizontal surface is measured only at Sebele, but sunshine duration and extremum temperatures are measured at several locations throughout the country. This paper presents bivariate models that relate solar irradiation to sunshine duration, and solar irradiation to extremum temperatures for Sebele, Botswana. Autocorrelation analysis revealed that the solar irradiation series is stationary for d=2 and D=0, sunshine duration series is stationary for d=0 and D=0, while the extremum temperatures series are stationary for either d=0 and D=N where N=1, 2, . . . or d=1 and D=1. It is found that there is a lag of three months between the peaks of the differenced series of fractional sunshine duration and fractional solar irradiation. On the other hand it is found that there is at most a lag of one month between the peaks of the differenced series of maximum temperature and solar irradiation, and that there is no lag between the peaks of the differenced series of minimum temperature and solar irradiation. Analysis of the noise component revealed that the bivariate processes under consideration behaved either as a purely seasonal MA processes of order (0,1,1) or as ARIMA processes of order (0, 1, 1)x (0, 1, 1)12 or as a purely nonseasonal, autoregressive process of order 2. We claim that the relationships found for Sebele can be applied to estimate solar irradiation at other locations with climatic conditions similar to Botswana. URI: http://hdl.handle.net/10311/177 Files in this item: 2
jain_RE_2003.pdf (1.288Mb)license.txt (1.998Kb) -
Nijegorodov, N.; Mabbs, R.; Winkoun, D.P. (Elsevier Science Ltd. www.elsevier.com/locate/saa, NaN, 2003)[more][less]
Abstract: Please refer to the attached article for an ABSTRACT. The abstract was not uploaded here due to formula appearance problem in UBRISA. URI: http://hdl.handle.net/10311/402 Files in this item: 1
Nijegorodov_SAa59-2003.pdf (1.367Mb) -
Wright, C.; Kgaswane, E.M.; Kwadiba, M.T.O.; Simon, R.E.; Nguuri, T.K.; McRae-Samuel, R. (Elsevier Science Ltd. www.elsevier.com/locate/lithos, NaN, 2003)[more][less]
Abstract: Events induced by deep gold-mining activity on the edge of the Witwatersrand basin dominate the seismicity of South Africa. The deployment of 54 broad-band seismic stations at 84 separate locations across southern Africa between April 1997 and April 1999 (Kaapvaal network) enabled the seismicity of South Africa to be better defined over a 2-year period. Seismic events located by the South African national network, and by localized seismic networks deployed in mines or across goldmining areas, were used to evaluate earthquake location procedures and to show that the Kaapvaal network locates mininginduced tremors with an average error of 1.56 ± 0.10 km compared with 9.50 ± 0.36 km for the South African network. Travel times of seismic events from the mines recorded at the Kaapvaal network indicate regional variations in the thickness of the crust but no clearly resolved variations in seismic wavespeeds in the uppermost mantle. Greater average crustal thicknesses (48–50 km compared with 41–43 km) are observed in the northern parts of the Kaapvaal craton that were affected by the Bushveld magmatism at 2.05 Ga. Estimates of average crustal thickness for the southern part of the Kaapvaal craton from receiver functions (38 km) agree well with those from refracted arrivals from mining-induced earthquakes if the crustal thicknesses below the sources are assumed to be 40–43 km. In contrast, the average crustal thickness inferred from refracted arrivals for the northern part of the Kaapvaal craton is larger by about 7 km (51 km) than that inferred from receiver functions (44 km), suggesting a thick mafic lower crust of variable seismic properties due to variations in composition and metamorphic grade. Pn wavespeeds are high (8.3–8.4 km/s), indicating the presence of highly depleted magnesium-rich peridotite throughout the uppermost mantle of the craton. Seismic Pg and Sg phases indicate that the upper crust around the Witwatersrand basin is comparatively uniform in composition when averaged over several kilometres. URI: http://hdl.handle.net/10311/280 Files in this item: 1
Wright_L71_2003.pdf (3.483Mb) -
Mabbs, R.; Nijegorodov, N.; Downey, W.S. (Elsevier Science Ltd. www.elsevier.com/locate/saa, NaN, 2003)[more][less]
-
Comprehensive study of solar conditions in Mozambique: the effect of trade winds on solar componentsNijegorodov, N.I.; Devan, K.R.S.; Simao, H.; Mabbs, R. (Elsevier Science Ltd. www.elsevier.com/locate/renene, NaN, 2003)[more][less]
Abstract: A new algorithm to simulate all solar components and optimum slopes, Bopt, based on new models for direct normal beam and diffuse radiation and an analytical model to predict Bopt, developed at the University of Botswana is applied for complete study of solar conditions in Mozambique. The components of solar radiation depend to a large extent on the number of h of sunshine. However, it is obvious that cloud-cover is determined mainly by the prevailing trade winds, which carry moisture and rain clouds. This is of especial concern in coastal areas. In the current work, hourly, I, daily, H and monthly mean, H¯ components of solar radiation and the optimum slopes of a north-south aligned collector are simulated and analyzed for 21 synoptic stations in Mozambique. Monthly mean daily direct normal, H¯ bn solar radiation maps are plotted for December and June and discussed. It is found that, to a great extent, isoinsolation curves are determined by the prevailing trade winds, mountain chains and coastal conditions. Plotted maps of annual mean daily direct normal and global solar radiation also show tremendous dependence on the prevailing winds. Several special locations in Mozambique with quite high or very low solar radiation components are pointed out and the reasons explained. URI: http://hdl.handle.net/10311/267 Files in this item: 1
Nijegorodov_RE28_2003.pdf (2.514Mb) -
Nijegorodov, N.; Winkoun, D.P.; Nkoma, J.S. (Elsevier Science Ltd http:www.elsevier.com/locate/saa, NaN, 2003)[more][less]
Abstract: Please refer to the attached article for an ABSTRACT. The abstract was not uploaded here due to formula appearance problem in UBRISA. URI: http://hdl.handle.net/10311/403 Files in this item: 1
Nijegorodov_SAa60_2004.pdf (1.056Mb) -
Kwadiba, M.T.O.G.; Wright, C.; Kgaswane, E.M.; Simon, R.E.; Nguuri, T.K. (Elsevier Science Ltd. www.elsevier.com/locate/lithos, NaN, 2003)[more][less]
Abstract: Pn arrivals from mining-induced earthquakes on the edge of the Witwatersrand basin show that the P wavespeeds in the uppermost mantle are almost constant throughout most of the Kaapvaal craton. The presence of only small wavespeed variations allows the use of a simple method of estimating crustal thicknesses below the stations of the Kaapvaal broad-band network using Pn times that has been compared with results from receiver functions. One thousand three hundred thirty-seven Pn arrivals were used to derive crustal thicknesses at 46 stations on the Kaapvaal craton. The average crustal thicknesses for 19 centrally located stations on each of the northern and southern regions of the craton that yielded well-constrained thicknesses were 50.52 ± 0.88 km and 38.07 ± 0.85 km, respectively. In contrast, the corresponding average thicknesses determined from receiver functions were 43.58 ± 0.57 km and 37.58 ± 0.70 km, respectively. The systematically lower values for receiver functions in the northern part of the Kaapvaal craton that was affected by the Bushveld magmatism at 2.05 Ga, suggest that the receiver functions do not enable the petrological crust mantle boundary to be reliably resolved due to variations in composition and metamorphic grade in a mafic lower crust. The Pn times also suggest pervasive azimuthal anisotropy with maximum wavespeeds of about 8.40 km/s at azimuths of about 15° and 217° in the northern and southern regions of the craton, respectively, and minimum wavespeeds of about 8.25 km/s. URI: http://hdl.handle.net/10311/281 Files in this item: 1
Kwadiba_L71_2003.pdf (2.747Mb) -
Simon, R.E.; Wright, C.; Kwadiba, M.T.O.; Kgaswane, E.M. (Elsevier Science Ltd. www.elsevier.com/locate/lithos, NaN, 2003)[more][less]
Abstract: Average one-dimensional P and S wavespeed models from the surface to depths of 800 km were derived for the southern African region using travel times and waveforms from earthquakes recorded at stations of the Kaapvaal and South African seismic networks. The Herglotz–Wiechert method combined with ray tracing was used to derive a preliminary P wavespeed model, followed by refinements using phase-weighted stacking and synthetic seismograms to yield the final model. Travel times combined with ray tracing were used to derive the S wavespeed model, which was also refined using phase-weighted stacking and synthetic seismograms. The presence of a high wavespeed upper mantle lid in the S model overlying a low wavespeed zone (LWZ) around 210- to - 345-km depth that is not observed in the P wavespeed model was inferred. The 410-km discontinuity shows similar characteristics to that in other continental regions, but occurs slightly deeper at 420 km. Depletion of iron and/or enrichment in aluminium relative to other regions are the preferred explanation, since the P wavespeeds throughout the transition zone are slightly higher than average. The average S wavespeed structure beneath southern Africa within and below the transition zone is similar to that of the IASP91 model. There is no evidence for discontinuity at 520-km depth. The 660-km discontinuity also appears to be slightly deeper than average (668 km), although the estimated thickness of the transition zone is 248 km, similar to the global average of 241 km. The small size of the 660-km discontinuity for P waves, compared with many other regions, suggests that interpretation of the discontinuity as the transformation of spinel to perovskite and magnesiowu¨ stite may require modification. Alternative explanations include the presence of garnetite-rich material or ilmenite-forming phase transformations above the 660-km discontinuity, and the garnet– perovskite transformation as the discontinuity. URI: http://hdl.handle.net/10311/265 Files in this item: 1
Simon_L71_2003.pdf (2.274Mb) -
Masale, M. (Elsevier Science Ltd. www.elsevier.com/locate/physc, January NaN, 2003)[more][less]
Abstract: The problem of a type II superconducting disk in a spatially inhomogeneous magnetic field is considered. The aim of the investigations undertaken here is to evaluate the effects of the spatial inhomogeneity of the parallel component of the applied magnetic field on the nature of the superconducting nucleation of a short cylinder. Full numerical solutions of the linearized Ginzburg-Landau equation for the order parameter, taking into account only the parallel component of the field, are presented in the case of a solid disk;free-standing and in a metallic matrix. In the case of a mesoscopic system, only the limiting form of the critical temperature is obtained. The temperature-field (e-f) curves are characterized by flux-entry points at each of which the azimuthal quantum number decreases by unity. The quasi-period of the flux-entry points increases in f with the increasing strength of the spatial inhomogeneity of the applied field. The increased effect of coating the superconductor with a suitable normal metal leads to the well known suppression of the critical temperature as well as smoothing out of flux entries. It is predicted that the wiping out of surface nucleation is effected with relative ease when the applied magnetic field is uniform than when it posseses a degree of spatial inhomogeneity. URI: http://hdl.handle.net/10311/197 Files in this item: 2
license.txt (1.998Kb)
Now showing items 1-20 of 46
Next Page