| dc.contributor.author |
Loukanov, I.A. |
|
| dc.contributor.author |
Uziak, J. |
|
| dc.date.accessioned |
2010-10-26T07:28:37Z |
|
| dc.date.available |
2010-10-26T07:28:37Z |
|
| dc.date.issued |
2007 |
|
| dc.identifier.citation |
Loukanov, I.A. & Uziak, J. (2007) Application of enamel-coating for draught reduction of a mouldboard plough, Progress in Agricultural Engineering Sciences, Vol.3, pp.115-129 |
en_US |
| dc.identifier.issn |
1786 335X |
|
| dc.identifier.uri |
http://hdl.handle.net/10311/632 |
|
| dc.description.abstract |
The effect of enamel-coating on the draught performance of an animal-drawn
mouldboard plough was studied. A single furrow swing mouldboard plough-Maun
Series, and the same type enamel-coated plough both ox-drawn, are compared under
similar working conditions such as soil moisture content, depth and width of cut and
approximately constant speed of ploughing. It was found that the enamel-coating
reduces both the plough draught and the specific draught. The percentage reduction of
the plough draught for enamel-coated plough compared to uncoated plough varied
from 12.7% at 25% soil moisture content to 18.1% at 32% soil moisture content (dry
basis). It was also found that the percentage reduction of the specific draught achieved
with the enamel-coated plough in comparison with the uncoated plough varied from
20.3% at 32% soil moisture content to 25.7% at 25% soil moisture content (dry basis). |
en_US |
| dc.language.iso |
en |
en_US |
| dc.publisher |
Akademiai Kiado |
en_US |
| dc.subject |
Uncoated plough |
en_US |
| dc.subject |
Enamel-coated plough |
en_US |
| dc.subject |
Plough draught |
en_US |
| dc.subject |
Specific draught |
en_US |
| dc.title |
Application of enamel-coating for draught reduction of a mouldboard plough |
en_US |
| dc.type |
Published Article |
en_US |