Browsing Faculty of Engineering and Technology by Title
-
Litchev, A.I.; Yanev, K.M. (University of Botswana, NaN, 2006)[more][less]
Abstract: Analysis of the induction motor failures show, that a significant number of motors are damaged due to single phasing.At such conditions the current increases rapidly and the motor is subjected to burnouts and consequently to long downfalls in the corresponding industry.Normally all motors are protected against thermal overloading by bimetal relays, but they are not always capable to ensure protection at single phasing.A secure protection is needed to trip the motor off in any case of single phasing especially for high power motors. The problems related to the motor protection against single phasing are discussed in this paper paper and for ensuring of such protection an electronic circuit is proposed and described. The circuit reacts immediately whenever a motor line current gets zero.A signal from this circuit switches off the motor starter on failures of anyone of the three phases. In such way the motor burnouts and downfalls are prevented. URI: http://hdl.handle.net/10311/622 Files in this item: 1
Litchev_BJT_2006.pdf (1.753Mb) -
Uys, P.; Kiravu, C.; Mothibi, J. (Emerald http://www.emeraldinsight.com, NaN, 2004)[more][less]
Abstract: This paper reports on the process of developing a blended online engineering course at the Faculty of Engineering and Technology of the University of Botswana. It presents the actual development process in terms of its management, the University's preferred pedagogical approach to student-centred learning and the consequent technological choices and deployment. In that regard, the paper will demonstrate the development of the Electrical principles course (EEB211) focusing attention on what was done, how and what result was achieved. This paper will be a useful reference for all those staff expected to develop their online courses alongside their normal face-to-face lectures. URI: http://hdl.handle.net/10311/460 Files in this item: 1
Uys_CWIS_2004.pdf (702.2Kb) -
Litchev, A.I.; Yanev, K.M. (University of Botswana, NaN, 1999)[more][less]
Abstract: Electromagnets are essentials for the operation of relays, contactors and other electromagnetic apparatus and take part in driving control and protective circuits of industrial processes and power systems. Performance of each electromagnet affects the driving time and the stability of operation of such circuits. This paper examines the improvement of the performance of AC electromagnets by using two diodes. The theoritical analysis lead to expressions for calculating the maximum, average and minimum values of coil-currents. Due to the electromagnetic processes in the coil, the current becomes pulsating but unidirectional and better force-gap characteristics are achieved. Consideration are made for reduction of the mass ferromagnetic and copper materials in the electromagnets and for decreasing teh responding time. URI: http://hdl.handle.net/10311/683 Files in this item: 1
Litchev_BJT_1999.pdf (924.8Kb) -
Sahu, B.K.; Mathur, S.; Kemsley, B. (University of Botswana, NaN, 2004)[more][less]
Abstract: The national road network continues to play a fundamental and catalytic role in the promotion of social and economic development of Botswana. However, a combination of adverse climatic and geological factors, such as scarcity of conventional road building materials, near absence of a non saline surface water, and climatic extremes have dictated the need for innovative engineering approaches to highway design, construction and maintenance. In recent years application of fly ash has been considered in road construction with great interest. Fly ash is a pozzolanic material, which in the presence of water combines with lime to produce a cementetious material with excellent structural properties. Attempts have, therefore, been made at Botswana Roads Department in collaboration with University of Botswana to explore the feasibility of utilizing fly ash alone to improve the physical and strength characteristics of locally available non-standard marginal materials. The results indicate that with the addition of fly ash plasticity dereases while California Bearing Ration (CBR) increases for calcrete and other locally available marginal materials for road construction. With appropriate amount of fly ash and an adequate curing the material can be improved to meet the requirement of base and sub-base coarse. URI: http://hdl.handle.net/10311/644 Files in this item: 1
Sahu_BJT_2004.pdf (606.5Kb) -
Ngowi, A.B. (Elsevier, NaN, 1997)[more][less]
Abstract: The traditional developed earth as one of the most important construction materials by taking cognizance of the strength requirements, durability of resulting structures and the environmental concern in processing and using the material. Overthe years, however, modern earth construction has replaced the traditional methods. Unfortunately,these methods are also accompanied by high energy consumption and environmental degradation.This paper examines the methods of improving earth construction in two major villages in Botswana.Tests with different stabilizers showed that only certain proportions were effective and it was concluded that the traditional earth construction may be improved by using certain ratios of cement and lime as stabilizers. URI: http://hdl.handle.net/10311/606 Files in this item: 1
Ngowi_CBM_1997.pdf (968.2Kb) -
Malumbela, G.; Moyo, P.; Alexander, M. (Elsevier http://www.elsevier.com/locate/conbuiltmat, NaN, 2011)[more][less]
Abstract: Corrosion crack widths are often used by structural engineers in the field to predict level of steel corrosion as well as residual load-bearing capacities of corroding RC structures. This paper presents further work on this matter but with focus on corrosion crack patterns and how they affect rate of crack widening. It is based on results from a research where 17 quasi-full-scale (153 254 3000 mm) RC beams were corroded under various levels of sustained loads. The rate of widening of corrosion crack widths was found to be very much dependent on crack patterns. Deformation of cover concrete under each crack pattern was discussed. It was found that at maximum crack widths below 0.6 mm, the majority of beams exhibited nearly similar crack patterns as well as rate of widening of corrosion cracks. A mass loss of steel of 1% corresponded to a maximum crack width between 0.14 and 0.22 mm. At large crack widths (>0.6 mm), various beams exhibited very different rates of crack widening. It was shown that at crack widths above 0.6 mm, to be conservative an increase in mass loss of steel of 1% corresponded to corrosion crack widening of 0.02 mm. URI: http://hdl.handle.net/10311/676 Files in this item: 1
Malumbela1_CBM_2010.pdf (1.399Mb) -
Daka, J.S.J. (http://ijedict.dec.uwi.edu/viewarticle.php?id=555., NaN, 2008)[more][less]
Abstract: In August 2002, the University of Botswana changed from a yearlong to a semester based academic system. However, the progression regulations were not be fully implemented on the information system mainly due to problems of interpretation. Due to this, a manual system was used. The manual system could not cope in making recommendations for all students leading to some regulations not being applied. To address this, a revision of the regulations was undertaken in 2007. These regulations require implementation on the information system. This paper discusses the main aspects of the 2007 regulations and their implementation via a computer program. The paper shows that a complete implementation of the regulations is possible using a computer program. The program was applied to sample students' academic results to provide progression recommendations that were found to agree with expected results. The paper concludes that an information system based implementation ensures uniform application of regulations. URI: http://hdl.handle.net/10311/470 Files in this item: 1
DAka_IJEDICT_2008.pdf (154.8Kb) -
Uziak, J.; Oladiran, M. T. (Tempus Publications http://www.ijee.ie/, NaN, 2009)[more][less]
Abstract: Complementary studies are fundamental for accreditation of engineering programmes in line with the Washington Accord. This paper presents the experiences of the University of Botswana in introducing General Education Courses (GECs) for the purpose of broadening the educational experience of all students, with particular reference to engineering students. Students registration data captured in the Integrated Tertiary Software (ITS) were analysed using Excel software. The five-year study period was from 2002 to 2007. Results indicate that engineering students mainly took GECs offered by the science and technology disciplines. It is concluded that GECs should be retained within the engineering programmes but the student advisory system should be improved and skills (e.g. IT competencies) that are important for professional development should be embedded in core courses instead of in general education. URI: http://hdl.handle.net/10311/700 Files in this item: 1
Uziak_IJEE2_2009.pdf (886.3Kb) -
Loukanov, I. A. (Research in Agricultural Engineering http://journals.uzpi.cz/web/RAE.htm, NaN, 2007)[more][less]
Abstract: This paper deals with the pumping process of a resonance-vibrating pump, which utilizes the resonance vibrations of one degree-of-freedom oscillating system. The pump is powered by a mechanical shaker consisting of two counter rotating offset masses and operating in resonance. The study investigates the nature of the pumping process and conditions required to achieve pumping action. Equations for the flow rate, pressure developed at ground level or any height above it, the pump efficiency, and the power delivered by the shaker are derived. The analysis of the pumping process revealed that the flow rate of the pump may be maximized either by increasing the acceleration imparted on the oscillating system, and/or by reducing the resonance frequency. It was found that the pressure developed by the pump is independent of the depth of pumping, provided that the same acceleration is imparted, and its efficiency may be increased either by reducing the resonance frequency and/or by increasing the depth of pumping. The preliminary test results about the flow rate and pressure developed at ground level appeared to be close to the values predicted by the proposed theory. Based on the analysis of the theoretical and experimental findings it is concluded that the equations derived in this study may be employed in designing resonance vibrating pumps for a desirable flow rate, pressure, and efficiency in pumping water from a specified depth. URI: http://hdl.handle.net/10311/693 Files in this item: 1
Loukanov_RAE_2007.pdf (792.9Kb) -
Ssegawa, J.K.; Samman, J.; Kgatlegang, J. (University of Botswana, NaN, 2001)[more][less]
Abstract: Without cost information, project planning is difficult for clients just as pricing of tenders is difficult for construction firms. No agency or organization in Botswana has endeavoured to collect, compile and analyze construction data with a view to establish a cost/price database and a subsequent building index. This paper reports an investigation into the possibility of establishing a building index and a related cost database of building items. It is based on previous studies in Botswana, which indicated that no such information exists anywhere in the public domain and many firms have a tough time during the planning of projects and pricing of project tenders. By producing a price database of common building and a building index the study shows the possibility of establishing a fully-fledged data bank for both items. Recommendations are made on how to improve the current situation and the results of the study. URI: http://hdl.handle.net/10311/623 Files in this item: 1
Ssegawa_BJT_2001.pdf (2.314Mb) -
Shuma-Iwisi, M.V. (University of Botswana, NaN, 1998)[more][less]
Abstract: One of the application areas of digital multiplexers is in implementation of logic equations. Truth tables can be used as a design tool, but they become very limited when design details are explored.It will be shown in this paper that the Karnaugh map (K-map) is an essential tool in the systematic detailed design of combinational circuits using multiplexers. The K-map will be used in two ways.First as a visual tool and secondly as a tool for decision making criteria. URI: http://hdl.handle.net/10311/619 Files in this item: 1
Suma-Iwisi_BJT_1998.pdf (1.304Mb) -
Muatjetjeja, B.; Chalique, C.M. (Elsevier http://www.sciencedirect.com/science?_ob=ArticleListURL&_method=list&_ArticleListID=1120288190&view=c&_acct=C000043160&_version=1&_urlVersion=0&_userid=778200&md5=2911144ac0b419d4936d24596384b313, NaN, 2009)[more][less]
Abstract: This paper aims to classify a generalized coupled Lane–Emden system and to compute the Noether operators corresponding to a Lagrangian for a generalized coupled Lane–Emden system which occurs in the modelling of several physical phenomena such as pattern formation, population evolution and chemical reactions. In addition the first integrals for the Lane–Emden system are constructed with respect to Noether operators. URI: http://hdl.handle.net/10311/416 Files in this item: 1
Muatjetjetja_CNSNS_2009.pdf (467.2Kb) -
Ketlogetswe, C. (Bentham Open http://www.bentham-open.org, January 1, 2009)[more][less]
Abstract: A number of photovoltaic pilot projects have been started in Botswana since 1990. The first photovoltaic project was Manyana PV project which started in 1992. The Japanese International Cooperation Agency (JICA) PV solar pilot project is the most recent PV solar project in Botswana, which was launched in 2003 at Kudumatse, Motlhabaneng, and Lorolwana villages. The primary objective of all these projects was to access the viability and sustainability of solar energy technology as an alternative source of energy especially for rural based communities. Depending on the findings, such projects were also intended to be replicated in other parts of the country. Despite all these efforts by the government of Botswana and donor agencies, the level of use of PV solar systems for power generation in Botswana, particularly in isolated communities, is very low. This paper, therefore, discusses the factors that impede the rapid development of photovoltaics power generation systems in the rural environment of Botswana. The study is focused on the photovoltaic power generation project which was carried out in three villages in Botswana, namely Kudumatse, Lorolwana and Motlhabaneng. URI: http://hdl.handle.net/10311/695 Files in this item: 1
Ketlogetswe_OREJ_2009.pdf (455.1Kb) -
Ketlogetswe, C.; Kemoeng, L.L.; Nato, L.T. (University of Botswana, www.ub.bw, NaN, 2004)[more][less]
Abstract: This paper describes a case study that evaluated the level of recycling operations in Botswana. Recycling operations are now recommended as effective waste management strategies for reducing the amount of municipal solid waste disposed at landfill. In assesing the level of recycling operations in Botswana, two companies which are effectively involved in the recycling operation were selected as the focus of the evaluation process. Then data from the two companies is complemented by the data collected from Gaborone landfill site. Finally the role of non-governmental organisations particularly environmental watch Botswana (somarelang Tikologo) is discussed. URI: http://hdl.handle.net/10311/822 Files in this item: 1
Ketlogetswe_BJT-2004.pdf (799.8Kb) -
Khalique, C.M.; Muatjetjeja, B. (Elsevier http://dx.doi.org/10.1016/j.amc.2009.01.008, NaN, 2009)[more][less]
Abstract: We carry out the Lie group classification of the generalized Lane–Emden equation xu00 þ nu0 þ xHðuÞ ¼ 0, which has many applications in mathematical physics and astrophysics. We show that the equation admits a three-dimensional equivalence Lie algebra. It is also shown that the principal Lie algebra, which in this case is trivial, has seven possible extensions. Three new cases arise for which the Lie point symmetry algebra is nontrivial. Comparison is then made of these cases with the Noether symmetry cases as well as the partial Noether operators. URI: http://hdl.handle.net/10311/415 Files in this item: 1
Khalique_AMC_2009.pdf (532.1Kb) -
Ganesan, C.T. (University of Botswana, NaN, 1999)[more][less]
Abstract: Water scarcity in arid and semi-arid countries such as Botswana; call for judicious planning and economic use. In this connection many water saving components and appliances have been devised. One such system for example is the partial flushing unit fitted to water closets, which cause the volume and flow of water in the drainage system decrease, compared with the ordinary systems. To maintain a sufficient transportation in drainage pipes connected to low flush water closets (water closets with a flow less than 6 litres per flush)it is necessary to follow a set of rules used in conventional systems. Author suggests that in countries like Botswana where availability of water is unpredictable only 4 litres per flush can be allowed for successful operations. In this paper certain rules for design and dimensioning drainage pipes for water saving systems are proposed. Besides the paper presents a complete general survey of the influence of branches and bends illustrated by means of drawings and descriptions. URI: http://hdl.handle.net/10311/618 Files in this item: 1
Ganesan_BJT_1999.pdf (1.079Mb) -
Ketlogetswe, C. (University of Botswana, NaN, 1998)[more][less]
Abstract: Since independence, the economy of Botswana has been undergoing a rapid transition from one in which the majority of the people depend on traditional agriculture and pastoralism to one in which formal sector employment predominates. This is partly reflected by rapid increase in vehicle population. Because of these changes,the country started to experience environmental problems. Unfortunately from the time of independence until late eighties, the level of environmental awareness in the country was very low, and therefore waste minimisation and reduction of environmental impact procedures were never in place.To date, many organizations in the country still seem not to be committed to reducing and disposing their wastes in environmentally friendly manner. The need to reconcile development with environmental concern, thus sustainable development, is vital. For the country to achieve that, an introduction of an environmental impact assessment in Botswana is essential, and thus, the main thrust of the current investigation is to determine the level of concern about environmental problems posed by waste engine oil in various organizations in the country. Management of various organizations were interviewed on their methods of waste of engine oil disposal. It was found that the disposal of waste engine oil by many organizations is resulting in serious environmental problems. URI: http://hdl.handle.net/10311/675 Files in this item: 1
Ketlogetswe_BJT_1998.pdf (1.028Mb) -
Ketlogetswe, C. (University of Botswana, Faculty of Engineering and Technology, http://ajol.info/index.php/bjt, April NaN, 1998)[more][less]
Abstract: Since independence, the economy of Botswana has been undergoing a rapid transition from one in which the majority of the people depend on traditional agriculture and pastoralism to one in which formal sector employment predominates. This is partly reflected by rapid increase in vehicle population. Because of these changes, the country started to experience environmental problems. Unfortunately from the time of independence until late eighties, the level of environmental awareness in the country was very low, and therefore waste minimisation and reduction of environmental impact procedures were never in place. To date, many organisations in the country still seem not to be committed to reducing and disposing their wastes in environmentally friendly manner. The need to reconcile development with environmental concern, thus sustainable development, is vital. For the country to achieve that, an introduction of environmental impact assessment in Botswana is essential, and thus, the main thrust of the current investigation is to determine the level of concern about environmental problems posed by waste engine oil in various organisations in the country. Management of various organisations were interviewed on their methods of waste engine oil disposal. It was found that the disposal of waste engine oil by many organizations is resulting in serious environmental problems. URI: http://hdl.handle.net/10311/659 Files in this item: 1
Ketlogetswe_BJT_1998.pdf (3.285Mb) -
Oladiran, M.T. (Elsevier Science Ltd, http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description, NaN, 1995)[more][less]
Abstract: The use of solar energy is well established for low-grade thermal applications such as water heating and purification. In many of the solar systems, the collector surface located in the Northern Hemisphere faces the true south direction. However, there are occasions in which the radiation received by the collector at various orientations is desirable, such as a collector incorporated with a tracking system. The data for such situations are not available for several solar farms in Nigeria. Consequently, in this study, the average global radiation on flat surfaces was determined for three zones in Nigeria. The total insolation was obtained while the surface azimuth angle was varied between 0° and 75° at 15° intervals. The results are presented for three inclinations of the collector surface, namely L − 10, L, and L + 10 degrees respectively. URI: http://hdl.handle.net/10311/671 Files in this item: 1
Oladiran_AE_1995.pdf (1.847Mb) -
Foster, J.D.G.; Uziak, J.; Loukanov, I.A. (Blackwell Publishing Ltd, http://onlinelibrary.wiley.com/journal/10.1111/(ISSN)1475-1305, NaN, 2009)[more][less]
Abstract: This study presents the experimental setup and results of measurement of forces and moments in a manually operated ram press machine. Tests were conducted on a BP30 ram press using electrical resistance strain gauges to measure forces present in the machine under operating conditions. The forces were obtained by capturing data for the strains in six channels, using a digital instrument system, and later calculated by using the sensitivity factors. A method was proposed to estimate the tension force and bending moment in the connecting rods based on the sums and differences of measured strains. Results obtained were converted into spreadsheet data and presented in graphs versus the position angle of the operating lever. URI: http://hdl.handle.net/10311/633 Files in this item: 1
Foster_SIJEM_2009.pdf (460.1Kb)