Browsing Mechanical Engineering by Author "Loukanov, I. A."
Now showing items 1-5 of 5
-
Loukanov, I. A.; Uziak, J.; Michalek, J. (Czech Academy of Agricultural Sciences http://agriculturejournals.cz/web/RAE.htm, NaN, 2005)[more][less]
Abstract: The power requirement of tillage implements is an important design consideration particularly for animal-drawn implements where the power is limited. The paper presents the possibility of reduction in the draught requirements of animal-drawn mouldboard plough by using enamel coating on the soil-engaged components such as the mouldboard, share and the landside. Trials were conducted to compare enamel-coated Maun Series single mouldboard plough (manufactured by Zimplow Limited, Bulawayo, Zimbabwe) with similar uncoated plough, both animal-drawn, under comparable working conditions. Experiments were done at 25% and 32% d.b. soil moisture content on a red clay soil in Zimbabwe. The parameters measured in evaluating the draught performance of both ploughs were the tractive effort(pull),speed of ploughing,depth and width of ploughing,and soil conditions(i.e.soil moisture content,soil bulk density and soil penetration resistance). It was found that for similar working conditions the enamel coating reduced the specific draught by 20 to 26% depending upon soil moisture content. URI: http://hdl.handle.net/10311/705 Files in this item: 1
Uziak_RAE_2005.pdf (504.4Kb) -
Uziak, J.; Loukanov, I. A. (Dalhousie University, NaN, 2009)[more][less]
-
Loukanov, I. A. (Research in Agricultural Engineering http://journals.uzpi.cz/web/RAE.htm, NaN, 2007)[more][less]
Abstract: This paper deals with the pumping process of a resonance-vibrating pump, which utilizes the resonance vibrations of one degree-of-freedom oscillating system. The pump is powered by a mechanical shaker consisting of two counter rotating offset masses and operating in resonance. The study investigates the nature of the pumping process and conditions required to achieve pumping action. Equations for the flow rate, pressure developed at ground level or any height above it, the pump efficiency, and the power delivered by the shaker are derived. The analysis of the pumping process revealed that the flow rate of the pump may be maximized either by increasing the acceleration imparted on the oscillating system, and/or by reducing the resonance frequency. It was found that the pressure developed by the pump is independent of the depth of pumping, provided that the same acceleration is imparted, and its efficiency may be increased either by reducing the resonance frequency and/or by increasing the depth of pumping. The preliminary test results about the flow rate and pressure developed at ground level appeared to be close to the values predicted by the proposed theory. Based on the analysis of the theoretical and experimental findings it is concluded that the equations derived in this study may be employed in designing resonance vibrating pumps for a desirable flow rate, pressure, and efficiency in pumping water from a specified depth. URI: http://hdl.handle.net/10311/693 Files in this item: 1
Loukanov_RAE_2007.pdf (792.9Kb) -
Uziak, J.; Loukanov, I. A. (CIGR Journal http://www.cigrjournal.org/, NaN, 2007)[more][less]
Abstract: The ram-press technology for oil expression has received a lot of attention in many African countries during the last two decades. The technology is based on manually operated mechanical presses, which employ a slider-crank mechanism in two different configurations. The original machine was invented by Karl Bielenberg in 1985 and since then continuous design improvements have been made to improve their performance and ease of operation. This paper deals with the performance of some commonly used ram press machines such as BP-35, BP-30 and FI-32, in order to establish their suitability for small rural oil expression technology. The available oil-seed processing techniques were discussed, including their suitability for locally grown sunflower varieties, and the characteristics of the ram press machines. The machines were tested by using three varieties of sunflower seeds, namely PNR 7225, PNR 7369, and Peredovik. The machines were compared by their outputs obtained when conducting a high production and high expression tests. Based on the above analysis the Camartec design (BP-30) was found to have the best performance. The machine had the highest efficiency and also the highest expression rate in comparison to CAPU design (BP-35) and RAM design (FI-32) machines. The FI-32 machine was found to be ineffective, having in the high expression test an expression rate below 20% irrespective of the type of seeds used. In terms of the speed of oil production the CAPU (BP-35) design performed better then the other machines. However in the high production test its performance was similar to that of Camartec machine. URI: http://hdl.handle.net/10311/697 Files in this item: 1
Uziak_AEI2_2007.pdf (989.2Kb) -
Loukanov, I. A.; Uziak, J. (International Symposium on Theory of Machines and Mechanisms (IFToMM), NaN, 2001)[more][less]
Abstract: The single-stroke ram press machine is widely used for sunflower oil extraction in African countries. It is manually operated, low speed machine constructed on the basis of slider-crank mechanism. The paper presents a detailed theoritical analysis of the mechanism of the linkage system. The analysis is done for different positions of the driving lever (handle) nad other parameters, which influence the performance of the machine. Based on that analysis conclusions on the optimal performance of the mechanism are drawn. URI: http://hdl.handle.net/10311/667 Files in this item: 1
Loukanov_IFToMM_2001.pdf (993.1Kb)
Now showing items 1-5 of 5